Asus E3060 WiFi-AP Solo User Manual Download Page 58

Page: 58 / 59

A-5

Regulatory Information/Disclaimers

Installation and use of this Wireless LAN device must be in strict

accordance with the instructions included in the user documentation

provided with the product. Any changes or modifications (including the

antennas) made to this device that are not expressly approved by the

manufacturer may void the user’s authority to operate the equipment. The

manufacturer is not responsible for any radio or television interference

caused by unauthorized modification of this device, or the substitution of

the connecting cables and equipment other than manufacturer specified. It

is the responsibility of the user to correct any interference caused by such

unauthorized modification, substitution or attachment. Manufacturer and its

authorized resellers or distributors will assume no liability for any damage

or violation of government regulations arising from failing to comply with

these guidelines.

CAUTION!

To maintain compliance with FCC’s RF exposure guidelines,

this equipment should be installed and operated with minimum distance

[20cm] between the radiator and your body. Use on the supplied antenna.

Unauthorized antenna, modification, or attachments could damage the

transmitter and may violate FCC regulations.

Safety Information

In order to maintain compliance with the FCC RF exposure guidelines,

this equipment should be installed and operated with minimum distance

[20cm]

between the radiator and your body. Use only with supplied

antenna.

Unauthorized antenna, modification, or attachments could damage the

transmitter and may violate FCC regulations.

CAUTION!

Any changes or modifications not expressly approved in this

manual could void your authorization to use this device.

MPE Statement

Your device contains a low power transmitter. When device is transmitted it

sends out Radio Frequency (RF) signal.

Summary of Contents for E3060 WiFi-AP Solo




























































Search results

Summary of Contents for E3060 WiFi-AP Solo

Reviews:

Related manuals for E3060 WiFi-AP Solo

Brands by name

Popular brands

Asus E3060 WiFi-AP Solo, User Manual

Search results

Summary of Contents for E3060 WiFi-AP Solo

Reviews:

Related manuals for E3060 WiFi-AP Solo

Brands by name

Popular brands