3-17
6. The AP mode configuration is
finished. You can view in the
Associate Table
of the Config
page all the wireless stations that
have connected to the WiFi-AP
Solo (AP mode).
4. You are directed to the
Wireless
Network Properties
page to set
up the AP mode. In this page,
you can change the SSID, select
the communication channel and
specify the network security.
When configuration is complete,
click
Finish
to apply the settings
and return to the setup wizard.
5. The default IP address of WiFi-AP
Solo is 192.168.0.1. To modify the
IP settings, double-click the wireless
network icon in the system tray -> click
Properties
-> double-click
Internet
Protocol (TCP/IP)
. You can change
the IP address, subnet mask and
default gateway of WiFi-AP Solo.
