Asus DSL-AC56U User Manual Download Page 9

Page: 9 / 127

1.4 Positioning your xDSL modem router

For the best wireless signal transmission between the xDSL

modem router and the network devices connected to it, ensure

that you:

• Place the xDSL modem router in a centralized area for a

maximum wireless coverage for the network devices.

• Keep the device away from metal obstructions and away from

direct sunlight.

• To prevent signal interference or loss, keep the device away

from 802.11g or 20MHz only Wi-Fi devices, 2.4GHz computer

peripherals, Bluetooth devices, cordless phones, transformers,

heavy-duty motors, fluorescent lights, microwave ovens,

refrigerators, and other industrial equipment.

• For the best front-to-rear coverage, place the xDSL modem

router in an upright position.

• For the best up-to-down coverage, place the xDSL modem

router in an inclined position.

Summary of Contents for DSL-AC56U
































































































































Search results

Summary of Contents for DSL-AC56U

Reviews:

Related manuals for DSL-AC56U

Brands by name

Popular brands

Asus DSL-AC56U, User Manual

Search results

Summary of Contents for DSL-AC56U

Reviews:

Related manuals for DSL-AC56U

Brands by name

Popular brands