Asus DSL-AC56U User Manual Download Page 63

Page: 63 / 127

•

Special Requirement from ISP

•

Host Name

: This field allows you to provide a host name for

your router. It is usually a special requirement from your ISP.

If your ISP assigned a host name to your computer, enter the

host name here.

•

MAC Address

: MAC (Media Access Control) address is a

unique identifier for your networking device. Some ISPs

monitor the MAC address of networking devices that

connect to their service and reject any unrecognized device

that attempt to connect. To avoid connection issues due to

an unregistered MAC address, you can:

• Contact your ISP and update the MAC address associated

with your ISP service.

• Clone or change the MAC address of the ASUS wireless

router to match the MAC address of the previous

networking device recognized by the ISP.

4.3.2 Dual WAN

DSL-AC56U provides Dual WAN support. Select

Failover mode

use a secondary WAN for backup network access.

Summary of Contents for DSL-AC56U
































































































































Search results

Summary of Contents for DSL-AC56U

Reviews:

Related manuals for DSL-AC56U

Brands by name

Popular brands

Asus DSL-AC56U, User Manual

Search results

Summary of Contents for DSL-AC56U

Reviews:

Related manuals for DSL-AC56U

Brands by name

Popular brands