Asus CROSSHAIR V FORMULA, User Manual, Page: 92 / 193

3-8 Chapter 3: BIOS setup
Processor ODT [Auto]
Configuration options: [Auto] [240 ohms +/- 20%] [120 ohms +/- 20%] [60
ohms +/- 20%]
DCT1.Information:
CKE drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
CS/ODT drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
ADDR/CMD drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
MEMCLK drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
Data drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DQS drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
Processor ODT [Auto]
Configuration options: [Auto] [240 ohms +/- 20%] [120 ohms +/- 20%] [60
ohms +/- 20%]
GPU.DIMM.Post
The sub-items in this menu display the status of the installed VGA cards and
memory. The field shows N/A if there’s no device installed on that slot.
DIGI.+.VRM/Power.Control
CPU.Load-line.Calibration.[Auto]
Load-line is defined by AMD CPU spec and affects CPU voltage. The CPU working
voltage will decrease proportionally to CPU loading. Higher Load-line calibration
would get higher voltage and better overclocking performance, but increase the
CPU and VRM thermal. This item allows you to adjust the voltage range from
the following percentages to boost the system performance: 0% (Regular), 25%
(Medium), 50% (High), 75% (Ultra High) and 100% (Extreme).
Configuration options: [Auto] [Regular] [Medium] [High] [Ultra High] [Extreme]
The actual performance boost may vary depending on your CPU specifiation.
CPU/NB.Load.Line.Calibration.[Auto]
Allows you to select the CPU/NB Load-Line mode.
Configuration options: [Auto] [Regular] [High] [Extreme]