Asus CROSSHAIR V FORMULA User Manual Download Page 184

Page: 184 / 193

5-2

Chapter 5: Multiple GPU technology support

5. Connect two independent auxiliary

power sources from the power

supply to the two graphics cards

separately.

6. Connect a VGA or a DVI cable to the

graphics card.

4. Align and firmly insert the

CrossFireX bridge connector to the

goldfingers on each graphics card.

Ensure that the connector is firmly

in place.

5.1.3.

Installing.CrossFireX.graphics.cards

The following pictures are for reference only. The graphics cards and the

motherboard layout may vary with models, but the installation steps remain the

same.

1. Prepare two CrossFireX-ready

graphics cards.

2. Insert the two graphics card into the

PCIEX16 slots.

3. Ensure that the cards are properly

seated on the slots.

Goldfingers

CrossFireX.bridge

Summary of Contents for CROSSHAIR V FORMULA


































































































































































































Search results

Summary of Contents for CROSSHAIR V FORMULA

Reviews:

Asus CROSSHAIR V FORMULA, User Manual, Page: 184 / 193

Search results

Summary of Contents for CROSSHAIR V FORMULA

Reviews: