Asus CROSSHAIR V FORMULA User Manual Download Page 108

Page: 108 / 193

3-24

Chapter 3: BIOS setup

Asmedia.USB.3.0.Battery.Charging.Support.[Disabled]

[Enabled]

Enables the Asmedia USB 3.0 Battery Charging Support fuction.

[Disabled]

Disables the fuction.

Intel.82583.LAN.[Enabled]

[Enabled]

Enables the Intel 82583 LAN controller.

[Disabled]

Disables the controller.

Launch.PXE.OPROM.[Disabled]

This item appears only when you set the previous item to [Enabled] and allows you

to enable or disable boot option for PXE OPROM.

Configuration options: [Enabled] [Disabled]

SB HD Azalia Configuration
HD.Audio.Azalia.Device.[Enabled]

[Enabled]

Enables the HD Audio Device.

[Disabled]

Disables the controller.

Azalia.Front.Panel.[HD]

Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or

high-definition audio depending on the audio standard that the front panel audio

module supports.
[AC97]

Sets the front panel audio connector (AAFP) mode to legacy AC’97

[HD]

Sets the front panel audio connector (AAFP) mode to high

definition audio.

SPDIF.Out.Type.[SPDIF]

[SPDIF]

Sets to [SPDIF] for SPDIF audio output.

[HDMI]

Sets to [HDMI] for HDMI audio output.

Summary of Contents for CROSSHAIR V FORMULA


































































































































































































Search results

Summary of Contents for CROSSHAIR V FORMULA

Reviews:

Asus CROSSHAIR V FORMULA, User Manual, Page: 108 / 193

Search results

Summary of Contents for CROSSHAIR V FORMULA

Reviews: