Asus CROSSHAIR V FORMULA User Manual Download Page 54

Page: 54 / 193

6.. Thermal.sensor.cable.connectors.(2-pin.OPT_TEMP1/2/3)

These connectors are for temperature monitoring. Connect the thermal

sensor cables to these connectors and place the other ends to the devices

which you want to monitor temperature. The optional fan1/2/3 can work with

the temperature sensors for a better cooling effect.

Enable

OPT.FAN1/2/3.overheat.protection

in BIOS if you connect thermal

sensor cables to these connectors.

7.. Digital.audio.connector.(4-1.pin.SPDIF_OUT)

This connector is for an additional Sony/Philips Digital Interface (S/PDIF)

port(s). Connect the S/PDIF Out module cable to this connector, then install

the module to a slot opening at the back of the system chassis.

The S/PDIF module and the thermal sensor cable are purchased separately.

2-24

Chapter 2: Hardware information

Summary of Contents for CROSSHAIR V FORMULA


































































































































































































Search results

Summary of Contents for CROSSHAIR V FORMULA

Reviews:

Asus CROSSHAIR V FORMULA, User Manual, Page: 54 / 193

Search results

Summary of Contents for CROSSHAIR V FORMULA

Reviews: