Asus Blitz Formula User Manual Download Page 94

Page: 94 / 166

4-20

Chapter 4: BIOS setup

CPU Voltage [Auto]

Allows you to select the CPU voltage. The text color in the configuration field

corresponds to the onboard CPU LED color, both of which indicate CPU voltage

condition. Refer to page 2-1 for CPU LED definition.

Configuration options: [Auto] [1.10000V] [1.10625V] [1.11250V] [1.11875V]

[1.12500V] [1.13125V] [1.13750V] [1.14375V] [1.50000V] [1.15625V] [1.16250V]

[1.16875V] [1.17500V] [1.18125V] [1.18750V] [1.19375V] [1.20000V] [1.20625V]

[1.21250V] [1.21875V] [1.22500V] [1.23125V] [1.23750V] [1.24375V] [1.25000V]

[1.25625V] [1.26250V] [1.26875V] [1.27500V] [1.28125V] [1.28750V] [1.29375V]

[1.30000V]~[1.80000V] [1.80625V] [1.81250V] [1.81875V] [1.82500V] [1.83125V]

[1.83750V] [1.84375V] [1.85000V] [1.85625V] [1.86250V] [1.86875V] [1.87500V]

[1.88125V] [1.88750V] [1.89375V] [1.90000V]

Refer to the CPU documentation before setting the CPU voltage. Setting a

high voltage may damage the CPU permanently, and setting a low voltage may

make the system unstable.

CPU Voltage Reference [Auto]

Configuration options: [Auto] [0.531V] [0.545V] [0.561V] [0.576V] [0.581V] [0.597V]

[0.618V] [0.635V]

Loadline Calibration [Auto]

Configuration options: [Auto] [Disabled] [Enabled]

FSB Termination Voltage [Auto]

Allows you to select the front side bus (FSB) termination voltage. The text color

in the configuration field indicates FSB termination voltage condition. When you

set the

NB LED Selection

item to [FSBT Volt], the onboard northbridge LED

displays FSB termination voltage condition. Refer to page 2-2 for northbridge LED

definition.

Configuration options: [Auto] [1.20V] [1.22V] [1.24V] [1.26V] [1.28V] [1.30V]~

[1.70V] [1.72V] [1.74V] [1.76V] [1.78V] [1.80V]

Setting a high FSB termination voltage may damage the chipset and CPU.

North Bridge Voltage [Auto]

Allows you to select the northbridge voltage. The text color in the configuration field

indicates northbridge voltage condition. When you set the

NB LED Selection

item

to [NB Volt], the onboard northbridge LED displays northbridge voltage condition.

Refer to page 2-2 for northbridge LED definition.

Configuration options: [Auto] [1.25V] [1.27V] [1.29V] [1.31V]~[1.97V] [1.99V]

[2.01V] [2.03V]

North Bridge Voltage Refernece [Auto]

Configuration options: [Auto] [0.61x] [0.67x]

Summary of Contents for Blitz Formula







































































































































































Search results

Summary of Contents for Blitz Formula

Reviews:

Asus Blitz Formula, User Manual, Page: 94 / 166

Search results

Summary of Contents for Blitz Formula

Reviews: