Asus Blitz Formula User Manual Download Page 60

Page: 60 / 166

2-34

Chapter 2: Hardware information

Connect the right-angle side

of SATA signal cable to SATA

device. Or you may connect the

right-angle side of SATA cable to

the onboard SATA port to avoid

mechanical conflict with huge

graphics cards.

right angle side

You must install the Windows

XP Service Pack 1 before using Serial ATA hard

disk drives. The Serial ATA RAID feature (RAID 0/RAID 1/RAID 5/RAID 10) is

available only if you are using Windows

XP or later version.

4. USB connectors (10-1 pin USB 78, USB 910, USB 1112)

These connectors are for USB 2.0 ports. Connect the USB module cable

to any of these connectors, then install the module to a slot opening at the

back of the system chassis. These USB connectors comply with USB 2.0

specification that supports up to 480 Mbps connection speed.

BLITZ FORMULA

USB 2.0 connectors

USB+5V USB_P12- GND NC

USB+5V

USB_P1

GND

USB1112

USB+5V USB_P10- GND NC

USB+5V USB_P9-

GND

USB910

USB+5V USB_P8- GND NC

USB+5V USB_P7-

GND

USB78

Never connect a 1394 cable to the USB connectors. Doing so will damage the

motherboard!

You can connect the USB cable to ASUS Q-Connector (USB, blue) first, and

then install the Q-Connector (USB) to the USB connector onboard.

Summary of Contents for Blitz Formula







































































































































































Search results

Summary of Contents for Blitz Formula

Reviews:

Asus Blitz Formula, User Manual, Page: 60 / 166

Search results

Summary of Contents for Blitz Formula

Reviews: