Asus Blitz Formula User Manual Download Page 89

Page: 89 / 166

ROG Blitz Formula

4-15

If you want the Serial ATA hard disk drives to use the Advanced Host Controller

Interface (AHCI), set this item to [AHCI].

Hard Disk Write Protect [Disabled]

Disables or enables device write protection. This will be effective only if device is

accessed through BIOS.

Confiuration option: [Disabled] [Enabled]

IDE Detect Time Out (Sec) [35]

Selects the time out value for detecting ATA/ATAPI devices.

Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]

4.3.7

AHCI Configuration

This menu allows you to configure AHCI settings. It appears only when you set the

Configure SATA as

item to [AHCI] in the

SATA Configuration

menu.

AHCI Settings

AHCI Port1 [Not Detected]

AHCI Port2 [Not Detected]

AHCI Port3 [Not Detected]

AHCI Port4 [Not Detected]

AHCI Port5 [Not Detected]

AHCI Port6 [Not Detected]

While entering setup,

BIOS auto detects

the presence of SATA

devices. This displays

the status of auto

detection of SATA

devices.

ACHI Port1~6 [XXXX]

Displays the status of auto-detection of IDE devices.

AHCI Port1

Device :Not Detected

SATA Port1

[Auto]

Select the type of

devices connected to

the system.

SATA Port1 [Auto]

Allows you to select the type of device connected to the system.

Configuration options: [Auto] [Not Installed]

Summary of Contents for Blitz Formula







































































































































































Search results

Summary of Contents for Blitz Formula

Reviews:

Asus Blitz Formula, User Manual, Page: 89 / 166

Search results

Summary of Contents for Blitz Formula

Reviews: