A S U S T e r m i n a t o r T 1 A 7 V T 4 0 0
A S U S T e r m i n a t o r T 1 A 7 V T 4 0 0
A S U S T e r m i n a t o r T 1 A 7 V T 4 0 0
A S U S T e r m i n a t o r T 1 A 7 V T 4 0 0
A S U S T e r m i n a t o r T 1 A 7 V T 4 0 0
4 - 1 1
4 - 1 1
4 - 1 1
4 - 1 1
4 - 1 1
• System power LED (3-pin PLED)
System power LED (3-pin PLED)
System power LED (3-pin PLED)
System power LED (3-pin PLED)
System power LED (3-pin PLED)
This 3-pin connector is for the system power LED. Connect the chassis
power LED cable to this connector. The system power LED lights up
when you turn on the system power, and blinks when the system is in
sleep mode.
• System warning speaker (4-pin SPEAKER)
System warning speaker (4-pin SPEAKER)
System warning speaker (4-pin SPEAKER)
System warning speaker (4-pin SPEAKER)
System warning speaker (4-pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning speaker.
The speaker allows you to hear system beeps and warnings.
• Hard disk drive activity LED (2-pin HDLED)
Hard disk drive activity LED (2-pin HDLED)
Hard disk drive activity LED (2-pin HDLED)
Hard disk drive activity LED (2-pin HDLED)
Hard disk drive activity LED (2-pin HDLED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD
Activity LED cable to this connector. The IDE LED lights up or flashes
when data is read from or written to the HDD.
• System management interrupt (2-pin SMI)
System management interrupt (2-pin SMI)
System management interrupt (2-pin SMI)
System management interrupt (2-pin SMI)
System management interrupt (2-pin SMI)
This 2-pin connector allows you to manually place the system in suspend
mode, or “green” mode, where system activity is instantly decreased to
save power and to expand the life of certain system components. Attach
the chassis-mounted suspend switch to this 2-pin connector.
• Reset button (2-pin RESET)
Reset button (2-pin RESET)
Reset button (2-pin RESET)
Reset button (2-pin RESET)
Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system
reboot without turning off the system power.
• ATX power button/soft-off button (2-pin PWRBTN)
ATX power button/soft-off button (2-pin PWRBTN)
ATX power button/soft-off button (2-pin PWRBTN)
ATX power button/soft-off button (2-pin PWRBTN)
ATX power button/soft-off button (2-pin PWRBTN)
This connector is for the system power button. Pressing the power
button turns the system on or puts the system in sleep or soft-off mode
depending on the BIOS settings. Pressing the power switch for more than
four seconds while the system is ON turns the system OFF.
