2 - 1 3
2 - 1 3
2 - 1 3
2 - 1 3
2 - 1 3
A S U S T e r m i n a t o r 1 A 7 V T 4 0 0
A S U S T e r m i n a t o r 1 A 7 V T 4 0 0
A S U S T e r m i n a t o r 1 A 7 V T 4 0 0
A S U S T e r m i n a t o r 1 A 7 V T 4 0 0
A S U S T e r m i n a t o r 1 A 7 V T 4 0 0
To install a PCI or AGP card.
1.
Place the chassis on its side.
2.
Remove the metal bracket
opposite the slot that you wish
to use.
3.
Align the card golden fingers
to the slot and its metal
bracket to the slot opening on
the chassis.
4.
Press the card firmly until it is
properly seated on the slot.
5.
Secure the card to the chassis
with a bracket screw.
P C I s l o t ( P C I 1 )
P C I s l o t ( P C I 1 )
P C I s l o t ( P C I 1 )
P C I s l o t ( P C I 1 )
P C I s l o t ( P C I 1 )
M e t a l b r a c k e t
M e t a l b r a c k e t
M e t a l b r a c k e t
M e t a l b r a c k e t
M e t a l b r a c k e t
2.8.2
2.8.2
2.8.2
2.8.2
2.8.2
Expansion card installation
Expansion card installation
Expansion card installation
Expansion card installation
Expansion card installation
2.8.3
2.8.3
2.8.3
2.8.3
2.8.3
Configuring an expansion card
Configuring an expansion card
Configuring an expansion card
Configuring an expansion card
Configuring an expansion card
After installing the expansion card, configure it by adjusting the software
settings.
1.
Turn on the system and change the necessary BIOS settings, if any.
See Chapter 5 for information on BIOS setup.
2.
Install the software drivers for the expansion card.
A G P s l o t ( A G P 1 )
A G P s l o t ( A G P 1 )
A G P s l o t ( A G P 1 )
A G P s l o t ( A G P 1 )
A G P s l o t ( A G P 1 )
