ASUS ASMB7-iKVM
4-19
PEF Management LAN Destination Page
This page is used to configure the Event filter, Alert Policy and LAN destination. A
sample screenshot of PEF Management LAN Destination Page is given below.
The fields of PEF Management – LAN Destination Tab are explained below.
1.
LAN Destination:
Displays Destination number for the newly configured
entry (read-only).
2.
Destination Type:
Destination type can be either an SNMP Trap or an Email
alert. For Email alerts, the 3 fields - destination Email address, subject and
body of the message needs to be filled. The SMTP server information also
has to be added - under Configuration->SMTP. For SNMP Trap, only the
destination IP address has to be filled.
3.
Destination Address:
If Destination type is SNMP Trap, then enter the IP
address of the system that will receive the alert. Destination address will
support the following:
- IPv4 address format.
- IPv6 address format.
If Destination type is Email Alert, then give the email address that will receive the
email.
4.
Subject & Message: These fields must be configured if email alert is chosen
as destination type. An email will be sent to the configured email address in
case of any severity events with a subject specified in subject field and will
contain the message field's content as the email body.
5.
Add:
To save the new LAN destination and return to LAN destination list.
6.
Cancel:
To cancel the modification and return to LAN destination list.
Summary of Contents for ASMB7-iKVM
Page 1: ...ASMB7 iKVM Server Management Board ...
Page 12: ...xii ...
Page 18: ...1 6 Chapter 1 Product introduction ...
