manualshive.com logo in svg

Asus ASMB7-iKVM, User Manual

Share
Download
Asus ASMB7-iKVM User Manual Download Page 26

2-8

Chapter 2: Installation

2.4 

BIOS configuration

You need to adjust the settings in the BIOS setup of the remote server for correct 
configuration and connection to the central server.

• 

Update the remote server BIOS file following the instructions in the 
motherboard/system user guide. Visit the ASUS website (www.asus.com) 
to download the latest BIOS file for the motherboard.

• 

The BIOS setup screens shown in this section are for reference purposes 
only, and may not exactly match what you see on your screen.

2.4.1 

Running the BIOS BMC configuration

To configure the BMC in the BIOS:

1. 

Restart the remote server, then press <Del> during POST to enter the BIOS 
setup.

2. 

Go to the 

Server Mgmt

 menu, then select the 

BMC network configuration 

sub-menu. Use this sub-menu to configure the BMC settings.

3. 

When finished, press <F10> to save your changes and exit the BIOS setup.

2.4.2 

BMC network configuration

Allows you to set the BMC LAN Parameter settings.

Version 2.01.1204. Copyright (C) 2010 American Megatrends, Inc.

Summary of Contents for ASMB7-iKVM



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands