manualshive.com logo in svg

Asus ASMB7-iKVM, User Manual

Share
Download
Asus ASMB7-iKVM User Manual Download Page 36

3-2

Chapter 3: ASUS Remote Console

3.1 

ASUS Host Management Controller Setup

The ASUS Host Management Controller Setup utility provides precise configuration 
and basic functions including System Event Log (SEL) generation and System 
Data Record (SDR) reading in DOS mode.

This utility also supplies configuration sequences for the type of host interface 
as well as direct real-time monitoring of system information including CPU 
temperature(s), fan speeds and system voltages.

3.1.1 

 Installing and launching the ASUS Host Management 

Controller Setup utility

To install the ASUS Host Management Controller Setup utility:

1. 

Boot the server in DOS mode using the support CD.

2. 

At the prompt, type 

ASMC7

, then press <Enter> to display the ASMC7 Utility 

Help Menu. The screen appears as shown.

3. 

The main utility screen appears. Press <Enter>.

C:\>ASMC7

ASUS Host Management Controller Setup Menu            No Support

Initial    View    Set    Monitor    Help

↑↓

: Select Menu   ESC: Exit   Up/Down 

 

 

KCS

ASMC7 Setup Utility

Version 7.00 Build 0000

Copyright(C) ASUS Tek INC.

All Rights Reserved

OK

OK

Summary of Contents for ASMB7-iKVM



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands