AR1000 RAID Subsystem Hardware Reference Guide
7
I. Introduction
I. Introduction
I. Introduction
Sections
You are reading the AR1000 RAID Subsystem Hardware Reference Guide.
This guide provides information on the various components used in this
system. This guide is intended for experienced users and integrators with
hardware knowledge of personal computers. You should also read all docu-
mentation and manuals included with this system and with your separately
purchased components.
There are only a few sections in this reference guide as follows:
I. Introduction
This section gives general and startup information and features for this system.
II. System Components
This section gives descriptions of each system component..
Symbols
To complete certain tasks safely and completely, you should be aware of a
few symbols used throughout this guide.
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when
trying to complete a task.
IMPORTANT: Information that MUST be followed in order to com-
plete a task.
NOTE: Tips and information to aid in completing a task.
PHILIP (CROSS) SCREW DRIVER: Tools required to install or
remove the components in this system.
STANDARD (FLAT) SCREW DRIVER: Tools required to install
or remove the components in this system.
STEP: Actions to complete a task.
•
1-1. How this Manual is Organized
