AR1000 RAID Subsystem Hardware Reference Guide
21
II. System Components
II. Components
Hot-Swap Bay
Hot-Swap Bay
To remove the hot-swap bay, first release the front cooling fans first by
pressing the eject mechanism with a small screwdriver. Remove the six
retaining screws as circled above and then the entire hot-swap bay can be
slid out of the chassis.
Hot-Swap Tray
There are two levers on the front of the hot-swap tray to help release or lock
the tray. To remove the tray, extend both levers and pull on both levers. To
install the tray, push the tray firmly into the bay with the levers extended,
then close the levers.
1
2
3
4
5
Hot-Swap Bay
