manualshive.com logo in svg

Asus AB-P 2600, User Manual, Page: 47 / 100

Share
Download
Asus AB-P 2600 User Manual Download Page 47

ASUS Book Size Barebone System

5-11

P4S8L

®

P4S8L OVER Voltage Setting(OVSEL1)

+2.5_DUAL

OVER Voltage

(Default)

OVSEL1

2 1

3 2

P4S8L

®

VCORE

OVER Voltage

(Default)

OVSEL2

P4S8L OVER Voltage Setting(OVSEL2)

2 1

3 2

3.

Over Voltage Setting 2 (2-pin OVSEL2)

2.

Over Voltage Setting  1(2-pin OVSEL1)

This jumper allows you to set the DDR Voltage setting. Keep the default
setting (pins 3-2) for +2.5 Dual voltage setting. Set to pins 1-2 for over
voltage setting.

Setting to a high voltage may cause permanent damage to the DDR DIMMs. It
is recommended that you keep the default setting (+2.5 Dual)

This jumper allows you to set the CPU’s Vcore voltage setting. Keep the
default setting (pins 3-2) for VCORE voltage setting. Set to pins 1-2 for over
voltage setting.

Setting to a high voltage may cause permanent damage to the CPU. It is
recommended that you keep the default setting (VCORE)

Summary of Contents for AB-P 2600





































































































Reviews:

No comments