Asus 90SV038A-M34CE0 User Manual Download Page 77

Page: 77 / 168

ASUS RS300-E9 Series

4-25

17. M.2 (NGFF) card connector (NGFF1 & NGFF2)

This connector allows you to install an M.2 device.

The M.2 (NGFF) device is purchased separately.

18. System Management Bus (SMBUS) connector (5-1 pin SMBUS1)

This connector controls the system and power management-related tasks. This

connector processes the messages to and from devices rather than tripping the

individual control lines.

•

This connector supports type 2242/2260/2280 devices on both PCI-E and SATA

interface.

•

When the M.2 connector is operating in SATA mode, SATA connector 5 and 6

(SATA 6 Gbps_5-6) will be disabled.

Summary of Contents for 90SV038A-M34CE0









































































































































































Search results

Summary of Contents for 90SV038A-M34CE0

Reviews:

Related manuals for 90SV038A-M34CE0

Brands by name

Popular brands

Asus 90SV038A-M34CE0, User Manual

Search results

Summary of Contents for 90SV038A-M34CE0

Reviews:

Related manuals for 90SV038A-M34CE0

Brands by name

Popular brands