C h a p t e r 2 : B a s i c i n s t a l l a t i o n
C h a p t e r 2 : B a s i c i n s t a l l a t i o n
C h a p t e r 2 : B a s i c i n s t a l l a t i o n
C h a p t e r 2 : B a s i c i n s t a l l a t i o n
C h a p t e r 2 : B a s i c i n s t a l l a t i o n
2 - 1 4
2 - 1 4
2 - 1 4
2 - 1 4
2 - 1 4
2.7
Installing a 3.5-inch floppy disk drive
You may install up to two floppy disk drives in the 3.5-inch drive bay under
the 5.25-inch drive bays.
Configure your optical drive as Master/Slave device before installing it to
the drive bay. Refer to the optical drive documentation for details.
To install a floppy disk drive(s):
1.
Select the drive bay you
intend to use.
2.
Remove the face plate
covering the drive bay by
releasing the protruding tabs.
9.
Connect a 4-pin power plug
from the power supply unit to
the drive power connector.
