Astrol Electronic AG reserves the right to change specifications without notice
Bat FLEX Manual
11/19
AD-10069-007 Rev. 03
4.2.
Measurement Flow
Each measurement is defined as a sequence of different steps. The execution pointer will then move from position to position during
the execution. Each step has its unique ID and can be configured with individual parameters. It‘s also possible to jump between the
steps by setting conditions to these parameters (for example if U > 1.5V jump to ID 20) to offer maximum flexibility to the user.
End
Start
Step Action
Check
Conditions
Has Jump
Target?
Set target as next
step
Go to next step.
Last Step?
Cond. met
No
Yes
No
Cond. invalid