Operation
900738-00 04/2017
Innovative Hearth Products
MHD35 Series Direct-Vent Gas Fireplaces
55
NOTE:
Fireplace shown with optional brick panels.
Installing the MHD Series 35” logs
The logs have notches/tabs to assist proper positioning. Upper logs rest on lower logs via notches/tabs. Proper log
placement is critical to prevent sooting. Place the logs in the gaps between fl ame peaks, so they do not impinge the
fl ames. Follow the log placement instructions precisely.
NOTE:
Do not cover the burner ports.
NOTE:
Ensure the left front log (1) and right front log (2) are correctly installed on the burner positioning pins.
Table 35 - 35” Log Set
4
5
3
2
1
Log Number
Description
1
Rear Log
2
Left Front Log
3
Right Front Log
4
Left Cross Log
5
Right Cross Log
Catalog number for the entire set:
35”: F1829
1.
If necessary, remove the glass door
(
Page 57
)
. Locate and bend up Burner Locating Tabs
(
Figure 50
)
.
2.
Locate the log placement brackets
(
Figure 50
)
. Place embers and other media
(see
Page 54
)
.
Figure 50 - Locating the log placement brackets
Figure 51 - Placing log 1 and 2
Left Log Bracket (front & rear) Right Log Bracket (front & rear)
Left and Right Burner Locating Tabs
1
3.
Align the notches in the bottom of the rear log (1) with the left rear brackets
(
Figures 50 and 51
)
.
4.
Position the left rear log (1) on the left rear bracket and the left front log (2) on the left front log bracket and the
left burner locating tab
(
Figure 51
)
.
Figure 52 - Placing log 3
Figure 53 - Placing log 4 and 5
3
4
5
5.
Position the right front log (3) on the right front log bracket and right burner locating tab
(
Figure 52
)
.
6.
Position the left cross log (4) on the left rear log (1) and right cross log (5) on the right rear log bracket
(
Figure 53
)
.
2
