Astria.us.com
126733-01H
7
SAFETY
Continued
6. Have venting system inspected annually by a qualified service
person. If needed, have venting system cleaned or repaired. See
Cleaning and Maintenance,
Page 27
.
7. Do not use any solid fuels (wood, coal, paper, cardboard, etc.)
in this fireplace. Use only the gas type indicated on fireplace
nameplate.
8. This appliance, when installed, must be electrically grounded in
accordance with local codes or, in the absence of local codes, with
PRODUCT IDENTIFICATION
Figure 1 - Direct-Vent Fireplace
Outer Glass
Door
Screen
Barrier
J7450 36"
J7456 42"
Log Set
Flue Collar
Top Spacer
Spacer
Nailing Flange
Lower Door/
Control Cover
Herringbone Brick
Refractories
Grate
Based on CSA P.4.1-2015
the National Electrical Code, ANSI/NFPA 70 or Canadian Electrical
Code, CSA C22.1.
9. Do not use fireplace if any part has been exposed to or under
water. Immediately call a qualified service person to arrange for
replacement of the unit.
10. Do not operate fireplace if any log is broken.
11. Do not operate fireplace with glass door removed, cracked or
broken.
12. Provide adequate clearances around air openings.
LOCAL CODES
Install and use fireplace with care. Follow all local codes. In the
absence to local codes, use the current National Fuel Gas Code ANSI
Z223.1/NFPA 54* (USA) or the current CAN/CGA B149.1 Installation
Code (Canada). *Available from:
American National Standards Institute, Inc.
25 West 43rd Street, 4th floor
New York, NY 10036
National Fire Protection Association, Inc.
1 Batterymarch Park
Quincy, MA 02169-7471
Listing:
This fireplace complies with the National Safety Standards
and is listed and tested by the PFS Corporation to ANSI Z21.50/CSA
2.22 standard as a vented gas fireplace.
These appliances comply with CSA P.4.1-2015 “Testing Method for
Measuring Annual Fireplace Efficiency. P4 (EnerGuide) is a measure-
ment of the Canadian Office of Energy Efficiency.
f i r e - p a r t s . c o m
