Supplementary features
eud-1399/1.0 – R1.1 – 07.2011
51
Paging an internal user using the general bell
You are unable to reach an internal user and thus want to page them.
When general bell is configured in the system, you can search for an internal user
using the general bell. The paged person can answer from any phone.
1. Enter function code #36 for a business call.
2. Enter your internal phone number.
3. Enter your PIN.
4. Enter the internal or external phone number with the exchange access digit.
Pick up the handset.
➔
The phone is now enabled; the external user is called.
Note:
When you hang up, dialling by name and your private phone book remain
available for a whole minute so you can make another call.
Or:
1. Enter procedure #46 for a private call.
2. Enter your internal phone number.
3. Enter your PIN.
4. Enter the external call number directly, without the exchange access digit.
5. Pick up the handset.
➔
The phone is now enabled; the external user is called.
Note:
The default PIN setting "0000" is not accepted. First change the PIN as
described in chapter
or with function code *47
(see "User’s Guide Function Codes" on the Aastra 400
DocFinder:
). If you have forgotten your PIN, your
system administrator can reset it to the default setting.
Page
Press the
Menu
/
-
repeatedly until
Page
is displayed.
Page
Press the
Page
softkey.
<Phone number>
Enter the phone number of the user to be paged and confirm with the
Ok
softkey.
➔
User is called and receives your phone number.
☛
☛
