Personalizing your phone
eud-1399/1.0 – R1.1 – 07.2011
63
Changing the PIN
You want to change the PIN used to lock/unlock your phone (see Chapter
, page
and
, page
The digit combination "0000" is set as default. You can select any 2 to 10-digit combi-
nation for your new PIN.
If you have forgotten your PIN, your system administrator can reset it to the default
setting. Depending on the system settings the function may not be available.
Note:
Your PIN applies to all your phones.
Menu
<long>
Press and hold down the
Menu
softkey.
➔
Configuration mode is active.
PIN
Use the
-
softkey to scroll through the menu and select the
PIN
softkey.
➔
The display shows
Old PIN
.
<Old PIN>
Enter the old PIN and confirm with the
Ok
softkey.
➔
The display shows
New PIN
.
<New PIN>
Enter the new PIN and confirm with the
Ok
softkey.
➔
The display shows
Confirm
.
<New PIN>
Enter the new PIN a second time and confirm with the
Ok
softkey.
➔
The new PIN is stored.
Notes:
• For each digit entered, the display shows an "*".
• You can also change the PIN with function code *47 (see "User’s Guide Func-
tion Codes" on the Aastra 400 DocFinder:
).
☛
☛
☛