Supplementary features
eud-1399/1.0 – R1.1 – 07.2011
45
Ring alone
This function lets you specify which of your phones signals incoming calls
acoustically (as part of the one-number user concept). For further informa-
tion refer to Chapter
, page
Call routing
This function lets you specify where incoming calls are routed to (as part of
the one-number user concept). For further information refer to Chapter
"Activating personal call routing"
Forwarding
With this function you forward incoming calls directly to a different destina-
tion. For further information refer to Chapter
"Forwarding calls (Call forward-
.
Forwarding if busy
With this function you forward incoming calls directly to a different destina-
tion if you are busy. For further information refer to Chapter
Call Forwarding on No Reply
(CFNR)
With this function you forward incoming calls you receive on your phone to
another destination. For further information refer to Chapter
, page
.
Switch group
This function lets you route calls and functions via switch groups (with two
switch positions).
Control output
You can control external electric equipment or installations using control
outputs. For example you can use your phone to open and close electric
gates or to switch the lights on or off throughout a building.
Announcement
Announcement service for incoming internal and external calls. If you do not
answer an external call after a set delay, the user who is calling will obtain an
announcement. After the announcement the caller will then hear the ring-
back tone again.
Lock
This function protects you against Call Waiting and Announcement. For fur-
ther information refer to Chapter
"Activating protection against call types"
,
.
Remote control
This function lets you set remote maintenance access to your phone on a
one-off basis of permanently.
MCID
This function lets you track a malicious call. For further information refer to
Chapter
"Tracking a malicious call (MCID)"
.
ACD
(Automatic Call Distri-
bution)
The call routing of calls in the queue can be controlled using an ACD appli-
cation.
User group
(UG)
In the user group incoming and internal calls are routed to a group of inter-
nal destinations according to a preconfigured call distribution.
Home alone
If calls to a user group can only be answered by one user, the user in question
can activate Home Alone on the user group. Then if the user is already in a
call, all subsequent internal or external calls to the user group obtain a busy
tone.
Function
Description