Plus4YouTS
User Manual
49
of
216
English
6.7.2
Programming
The machine is programmed by default. Should the hot water
doses need to be modified, proceed as follows:
•
Place the pot under the hot water
spout.
•
Press and hold down the
P
rog
S
top
but-
ton on the left pushbutton panel
for 5 seconds: all of the dose but-
tons LEDs will light up.
•
Press the hot water dispensing
button
P
rog
S
top
.
•
Wait for the dispensing process to
finish; to confirm the dose, press
the
P
rog
S
top
button again.
• When you have finished program
-
ming, press the
P
rog
S
top
button.
The tea buttons are found on the keypads of each
group. These can be programmed individually and pro-
vide doses that are independent from one another.
The 4GR version has 2 hot water spouts.
The 2 keypads on the left control the left hot water spout,
while the 2 keypads on the right control the right hot water
spout.
6.8 Automatic steam wand (optional)
The automatic steam wand can be used for automatically
frothing milk at the programmed temperature.
It can be controlled using the keypad (15) located on the
base of the machine.
15
6.8.1
Tips regarding its use
• Only froth the amount of milk that you intend to use; once
heated, the milk will have to be completely poured out of
the jug and cannot be reheated.
•
The automatic steam wand only guarantees an accuracy
of ± 3°C between the set temperature and the actual milk
temperature, if the starting milk temperature is 4°C.
•
As the steam automatically stops dispensing when the set
milk temperature is reached, only fill the jug half way in
order to prevent the milk froth from spilling out.
•
Use a suitably-sized jug for the amount of milk that re-
quires frothing (approx. 200 ml is recommended) and
make sure that it is circular and not conical (see the im-
age).
P
rog
S
top
P
rog
S
top
P
rog
S
top
Summary of Contents for Plus4YouTS
Page 215: ......
