Plus4YouTS
User Manual
47
of
216
English
6.5.3
Programming
Each dose must be programmed with freshly
ground coffee and not with previously-used coffee
grounds.
The machine is programmed by default. Should the coffee
doses need to be modified, proceed as follows:
• Always programme the left pushbutton panel first. This way,
all the pushbutton panels will be automatically programmed.
If necessary, subsequently pro-
gramme the others.
•
Press and hold down the
P
rog
S
top
button for 5 seconds: the
P
rog
S
top
button will flash and all the
pushbutton panel buttons be-
ing programmed will turn on.
• Fill the filter with a dose of
ground coffee and press it
down using the coffee press.
• Attach the filter holder to the
dispensing group.
•
Place the coffee cup under
the dispensing spout.
•
Press the desired dose button
(e.g.
P
rog
S
top
).
• All of the LEDs will turn off, ex
-
cept for the dose buttons being
programmed.
•
Wait for the dispensing pro-
cess to finish; to confirm the
dose, press the dose button
again or the
P
rog
S
top
button.
•
Repeat this operation for the
other dose buttons.
• When you have finished pro
-
gramming, press the
P
rog
S
top
but-
ton to voluntarily exit the dose
programming mode.
6.5.4
Displaying information
Depending on how the machine has been configured, when
the coffee is being dispensed, some information will appear
on the display.
Flow diagram
in time (ml/s) of
coffee dispensed for a
single group.
Viewing the
dispensing time
(secs) for all groups.
Viewing
the dispensing
temperature (°C) for
all groups.
Dispensing
pressure
Group
1
P
rog
S
top
P
rog
S
top
P
rog
S
top
Summary of Contents for Plus4YouTS
Page 215: ......
