USER manual
62
of
260
6.13.2 SAE version
To use the cup warmer, proceed as follows:
•
Place the cups on
the coffee machine
cup warmer (
1
);
•
move the cup warm-
er switch (
26
) to the
ON position.
To adjust the cup
warmer’s temperature,
proceed as follows:
•
Upon the machine
switch-on, keep but-
ton
STOP
PROG.
on the right-
hand push-button
panel pressed: the flashing led will indicate the cur-
rent configuration of the cup warmer according to
indications in the following drawings;
•
keep button
STOP
PROG.
pressed until on the keyboard the
led switches from flashing to a still light;
•
Press the key that corresponds to the desired con-
figuration;
•
confirm the operation by pressing button
STOP
PROG.
.
STOP
PROG.
OFF
70°C
90°C
80°C
STOP
PROG.
OFF
70°C
90°C
110°C
80°C
100°C
For safety reasons it is advisable not to place cloths or other objects
on the cup heater surface to keep the machine from overheating.
26
1
6.13.3 DISPLAY version
To use the cup warmer, proceed as follows:
•
Place the cups on the coffee machine cup warmer (
1
);
•
move the cup warmer switch (
26
) to the ON position.
To adjust the cup warmer’s temperature, proceed as
follows:
•
Press button
STOP
PROG.
for at least 5
seconds until all leds of the dose
buttons are lit;
•
press button
STOP
PROG.
repeatedly
until the following message will
be displayed:
CUP WARMER
80 °C
•
by means of buttons (+) and (-) of the right-hand
push-button panel, adjust the autosteamer’s tem-
perature displayed;
STOP
PROG.
Decreases
( - )
Increases
( + )
STOP
PROG.
Decreases
( - )
Increases
( + )
•
confirm the operation by pressing button
STOP
PROG.
;
•
To exit the programming mode,
press the key
STOP
PROG.
To switch off the cup warmer, set a temperature of less than 70°C (on
display will appear ---- ) or position the cup warmer switch to OFF.
STOP
PROG.
STOP
PROG.
