Product Overview
Panel Front side
LED/button/connector:
(1) POWER STANDBY: Press it to power on the device or put it into standby mode.
(2) POWER indicator: It lights on when the power is plugged in.
(3) USB indicator: It lights when the USB Storage is plugged in and
ready. It may take 5 seconds to
get ready when the USB storage is plugged in.
(4) IR sensor: It receives the command from remote control unit. Do not block the port.
(5)USB: It is the USB 2.0 port. Connect the external USB Flash disk or USB Mass Storage into it.
Panel Back side
Video connection: Please select one below to connect the TV set.
HDMI output: Please connect the HDMI cable to the HDMI input of TV set.
YPbPr: They connect the component YPbPr to the input of TV set.
VIDEO (CVBS): It connects the CVBS input of TV set.
AUDIO L/R: They connect the audio L/R to the input of TV set. If the HDMI is connected, then you
don’t need to connect AUDIO L/R.
Reset: Press the button to power off and on the device.
DC IN: It connects the DC input of the Power Adapter. The power requirement is 12Vdc, 1.5 A.
5.
2. 3.
1.
4.
2
Summary of Contents for Media Gear AP-32B
Page 1: ......
