NOTE:
The ceiling panel is large and can be an odd shape. Please use caution
when lifting this assembly and use two people to lift it into place.
1. Lift the ceiling into place onto the glass and acrylic walls.
2. Once in place verify that all of the holes align.
NOTE:
All of the holes should be aligned. If you find any that are not investigate
the cause. If no cause can be determined then you can choose to enlarge or add
additional holes. Always remember to pilot drill any new holes before enlarging.
3. Remove the ceiling and apply a generous bead of caulk around the top of the
unit in line with the mounting holes.
4. Using
Screw Pack 5
use the
M4 X 35mm
screws to lightly screw down the
front of the ceiling into the aluminum frame of the glass panel assembly.
5. Using the
M4 X 30mm
screws, bolts, nuts, and washers, lightly bolt the
ceiling to the acrylic wall panels.
6. Leave the screws and bolts only hand tight to aid the alignment of the final
assembly.
Step 8 Install the ceiling panel
23
SCREW PACK
(5)
