The following equipment is required:
l
#10 grounding ring connector
l
Ground wire (i.e., stranded, braided, or strap wire; 18 gauge American wire gauge
(AWG) minimum)
Figure 15: Grounding
Important
: Do not remove nut #1 from the screw as it will cause the screw to fall inside the
ACE-RIU chassis.
To ground the ACE-RIU, follow these steps:
1. Remove nut #2.
2. Slip the grounding ring connector onto the threaded end of the jackscrew.
3. Insert nut #2 onto the threaded end of the jack screw. Take care not to cross thread or
over-tighten the nut when reattaching.
19
Copyright © 2022 Advanced Simulation Technology inc.
ACE-RIU Technical User Guide (Rev. K, Ver. 4)
Summary of Contents for ACE-RIU
Page 2: ......
