9.0 Specifications
This chapter describes the following ACE-RIU specifications:
l
Power requirements
l
Memory devices
l
Temperature and humidity ranges
9.1 Power requirements
The hardware is powered by an individual power supply included with ACE-RIU shipment.
The power adapter inlet connector is an IEC 320 type C14 or C8, requiring a matching cord
set equipped with an IEC 320 C13 or C7 connector (i.e., female line cord). Country-specific
power connectors must be acquired separately for international use.
Input to PS-A-R-01
100–240 VAC, 50–60 Hz, 1.5 A
RMS
, (120 VAC), 0.75 A
RMS
(240 VAC)
Power In Connector
Inside Diameter 0.100", Outside Diameter 0.218", locking, center positive
Connector P/N:
Switchcraft 712RA supplied with P2439 Hex Nut
(5/16–32) and P2441 Washer
Mating Connector P/N:
Switchcraft 760k
Power Consumption
+15 VDC, 2A
9.2 Memory devices
Table 8, "ACE-RIU memory devices" below summarizes ACE-RIU memory device spe-
cifications:
Type
Size
User Modifiable
Function
Process to Clear
Volatile memory
MCU Internal
69 KB
No
Used as RAM for
an internal MCU
Remove power
Count to 30
Restore power
Nonvolatile memory
MCU Internal
256 KB
Yes
Firmware
None
Flash
8 MB
Yes
Firmware
None
Table 8: ACE-RIU memory devices
21
Copyright © 2022 Advanced Simulation Technology inc.
ACE-RIU Technical User Guide (Rev. K, Ver. 4)
Summary of Contents for ACE-RIU
Page 2: ......
