![ASTEL MGR100 Operating Instructions Manual Download Page 3](http://html.mh-extra.com/html/astel/mgr100/mgr100_operating-instructions-manual_2989704003.webp)
3
PREFACE
The MGR100 is a high-efficient GSM remote
controller specially designed to use in nautical
applications. Built-in GSM module with
different interfaces enable simple and easy
control and management of complete yacht
electrical and electronic equipment through
GSM mobile phone. Built-in relays enable
remote control of different yacht devices. Alarm
inputs enable remote control of different yacht
systems like pumps, engines and other
systems, voltage measuring and measuring of
temperature and humidity. By the help of
optional GPS receiver the position
management and tracking are enable and
alarming in the case of leaving or approaching
to the hold position.
The control of the unit is possible by the help of
SMS text messages or by the help of tone
(DTMF) dialing. Alarming is possible by
receiving the SMS text messages or by alarm
calls or by the combination of both of them.
Interactive voice responder confirms the
requests during DTMF control or inform about
the kind of alarm when alarm occurs. The unit
enables also speaker and microphone
connection to remote communication.
Programming is possible by the help of SMS
text messages or with PC by the help of RS-
232 serial interface.
This GSM Remote Control Unit comes in three
versions, Basic, Advance and Reference,
every model is available also with GPS
receiver.
FEATURES
built-in GSM module with SIM interface
built-in GPS module for position
management and alarming***
SMS
control
DTMF (PSTN, ISDN, GSM) control*
IVR – interactive voice responder**
temperature measuring and management*
analog voltage measuring and
management*
alarm sensor management
remote keyboard interface
speaker and microphone interface**
PC remote and local management**
wide range power supply
ABS
casing
accumulator
connection
PRECAUTIONS
The remote control unit has to be installed
and used in accordance with the
instructions of this manual only.
The power supply has to be disconnected
before installation.
Avoid using the remote control unit under
the presence of appliances generating
strong magnetic fields like radar, wheather
station and in places subject to direct
sunlight.
Do turn power off immediately and refer
servicing to qualified service personnel if
the remote control unit does not operate
normally following the operating
instructions.