background image

 

11 

WARRANTY 

 

 

1. The equipment manufactured by ASTEL d.o.o. is warranted to be free from defects in 

workmanship and materials under normal use and service. 

2. This Warranty is in effect for of two years from the date of purchase by the user. Proof of purchase 

must be included, to establish that it is inside the warranty period. 

3. This Warranty is transferrable and covers the product for the specified time period. 

4. In case any part od the equipment proves to be defective, other than those parts excluded in 

paragraph 5 below, the owner should do the following: 

(a) prepare a detailed written statement of the nature and circumstances of the defect, to the best 

of the Owner’s knowledge, including the date of purchase, the place of purchase, the name and 

adress of the installer, and the Purchaser’s name, adress and telephone number; 

(b) the Owner should return the defective part or unit along with the statement referenced in the 

preceding paragraph to the warrantor, ASTEL d.o.o., or an authorized distributor, 

postage/shipping prepaid and at the expense of the Purchaser; 

(c) if upon the Warrantor’s or authorized distributor’s examination, the defect is determined to 

result from defective material or workmanship, the equipment will be repaired or replaced at the 

Warrantor’s option without charge, and returned to the Purchaser at the Warrantor’s expense; 

(d) no refund of the purchase price will be granted to the Purchaser, unless the Warrantor is 

unable to remedy the defect after having a reasonable number of opportunities to do so. Prior 

to refund of the purchase price, Purchaser must submit a statement in writing from a 

professional supplier that the installation instructions of the Operating Instructions manual have 

been complied with and that the defect remains; 

(e) warranty service shall be performed only by the Warrantor, or an authorized distributor, and 

any attempt to remedy the defect by anyone else shall render this warranty void. 

5. There shall be no warranty for defects or damages coused by faulty installation or hook-up, abuse 

or misuse of the equipment including exposure to excessive heat, salt or fresh water spray, or 

water immersion except for equipment specially designed as waterproof. 

6. There shall be no responsibility or liability whatsoever on the part of the Warrantor or its 

employees and representatives for injury to any person or persons, or damage to property, loss of 

income or profit, or any other consequential or resulting damage or cost which may be claimed to 

have been incurred through the use or sale of the equipment, including any possible failure or 

malfunction of the equipment, or part thereof. 

 

 

Summary of Contents for LAD1800













Reviews: