Manual Load Switch LS 804
Subject to technical changes. 06/2017
Page 17 of 34
A.S.T. - Angewandte System Technik GmbH, Mess- und Regeltechnik
6.
Configuration via web browser
The configuration routine is accessed to via the browser by means of the IP address specified under
Chapter 5.3.2 Operating display / network for browser accessing (Figure 17 – Network information).
The LS 804 load switch has been operably tested under the following browsers/operating systems:
- WindowsXP
Web-Browser Chrome, Firefox, Opera, Internet-Explorer
- Windows7/8/10
Web-Browser Chrome, Firefox, Opera
6.1.
Status (information)
After the configuration routine has been accessed to via the browser, the following image will appear:
Figure 26 – Status information (LS804.01)
The "
Channel information
" section contains the display for sensors a to d as well as the cumulative loads
a/b, c/d and a-d along with additional system information.
In the event of an error occurring, the causes of failure can be determined by actuating the “
Error Status
”
link (also refer to Chapter 7.2 Status of relays Error1 and Error2).
Actuating the "
Relay status
" link will display the status of the contacts K1 to K6 (also refer to Chapter 7.1
Status of relays K1 to K6).
