Associated Research HYAMP II 5030DT, Operation And Service Manual

Page: 7 / 53

SAFETY
3
SERVICE AND MAINTENANCE
User Service
To prevent electric shock do not remove the instrument cover. There are no user
serviceable parts inside. Routine maintenance or cleaning of internal parts is not
necessary. Any external cleaning should be done with a clean dry or slightly damp cloth.
Avoid the use of cleaning agents or chemicals to prevent any foreign liquid from entering
the cabinet through ventillation holes or damaging controls and switches, also some
chemicals may damage plastic parts or lettering. Schematics, when provided, are for
reference only. Any replacement cables and high voltage components should be aquired
directly from Associated Research, Inc. Refer servicing to an Associated Research, Inc.
authorized service center.
ASSOCIATED RESEARCH, INC.
13860 WEST LAUREL DRIVE
LAKE FOREST, IL 60045-4546 U.S.A.
PHONE: 1 (847) 367-4077
1 (800) 858-TEST (8378)
FAX: 1 (847) 367-4080
E-MAIL : info@asresearch.com
www.asresearch.com
Service Interval
The instrument and its power cord, test leads, and accessories must be returned at least
once a year to an Associated Research authorized service center for calibration and
inspection of safety related components. Associated Research will not be held liable for
injuries suffered if the instrument is not returned for its annual safety check and maintained
properly.
User Modifications
Unauthorized user modifications will void your warranty. Associated Research will not be
responsible for any injuries sustained due to unauthorized equipment modifications or use
of parts not specified by Associated Research. Instruments returned to Associated
Research with unsafe modifications will be returned to their original operating condition at
your expense.
TEST STATION
Location
Select an area away from the main stream of activity which employees do not walk
through in performing their normal duties. If this is not practical because of production
line flow, then the area should be roped off and marked for
TESTING . No employees
other than the test operators should be allowed inside.
If benches are placed back-to-back, be especially careful about the use of the bench
opposite the test station. Signs should be posted:
"DANGER - TEST IN PROGRESS -
UNAUTHORIZED PERSONNEL KEEP AWAY."