124
To navigate to the Data Card Settings menu, select the Setup System softkey from
the 620L Main Menu and then select the Data Card Settings softkey in the Setup
System menu. A brief description of the settings follows:
Results Limit
The Results Limit allows the user to receive an alert message on the display of the
620L when the total number of results saved on the Data Storage Card’s internal
Flash memory has exceeded the predefined limit. This value can be set from the
default value of “0” (disables the function) to 100,000. At the conclusion of a test file,
if the total results on the internal Flash memory exceed the Results Limit, the following
message will display:
The message gives two options: Pressing Enter will clear the message and display it
again at the end of the next test file execution. Pressing Exit will clear the message
Summary of Contents for 620L
Page 99: ...93 ...
