screw on flange first
B A G D
REMOVE THESE
PARTS FOR:
TEAM: steps 6-8
T O O L S U S E D
s t e p 6
4474, qty 3
shock shaft end
6951, qty 3
set screw
8451, qty 3
silver spring
4473, qty 3
spring
adjusting nut
6274, qty 6
ball cup
disassembly rod
.050"
Slide the #8451 spring over the body and up against the
#4473 adjusting nut.
Screw the #6274 ball cup onto the #4474 shock shaft end.
Tighten the #4474 shock shaft end to the shaft with the
#6951 set screw.
Pop the #6274 ball cups on the ball ends of your kit.
Turn the spring adjusting nut to adjust spring tension.
Adjust spring nut to 1/16" from threaded end.
Do the other two shocks.
Remove the assembly tool and screw on the #6274 ball cup
where shown.
Screw the #4473 spring adjusting nut onto the shock
body threads, flange first, as shown.
To remove the parts from inside the shock, first loosen the
#6951 set screw of the #4474 shock shaft end (see step 7
above), then slide off the shaft end and spring.
Now carefully insert your disassembly rod into one of the
rounded grooves of the star clip and pop it out.
flange on this side
turn to adjust tension
D I S A S S E M B L Y
s t e p 8
s t e p 7
6274
4473
8451
6274
4474
6951
1
9
1/16" exposed threads
6274
6274
4
