2
T O O L S
HELPFUL TOOLS (NOT REQUIRED)
Allen drivers (straight Allen wrenches with hex shaped handles)
such as the following made by Associated:
#6957
.050" Allen wrench
#6958
1/16" Allen wrench
#6960
3/32" Allen wrench
#6961
2.5mm Allen wrench
Vernier calipers
Hobby scissors
Nut drivers (screwdriver-
handled hex socket tools) such
as the following from Associated:
#SP-86 3/16" nut driver
#SP-85 1/4" nut driver
#SP-82 11/32" nut driver
WARNING! Do not use a power screwdriver to install screws into
nylon, plastic, or composite materials. The fast rotation speed
can heat up the screws being installed. They can then break or
strip the threads during installation.
KIT TOOLS SUPPLIED
EXTRA STUFF NEEDED
Phillips screwdriver #2
needlenose pliers
soldering iron (40-50 watts) and a
small amount of Rosin core solder.
Pencil-type soldering iron is better
than the gun type.
DANGER! Tip is
HOT!
hobby knife
WARNING! This knife
cuts plastic and fingers with equal
ease, so be careful.
precision ruler
file
hand drill with 3/32" (or #43) drill bit
electrician's tape
strapping tape
Allen wrenches, .050", 1/16", 3/32"
shock tools
metal turnbuckle wrench
I T E M S N E E D E D T O C O M P L E T E Y O U R K I T
1 R/C two channel surface frequency radio system.
2 *Battery pack (6 cell).
3 Battery charger (we recommend a peak detection charger).
4 *Electronic speed control.
5 *R/C electric motor.
6 *Pinion gear, size to be determined by type and wind of motor you will
be using.
7 1:12 scale Lexan body.
*Available from Team Associated. See your catalogs.
V C S M i c r o S h o c k s
3 s h o c k d e s i g n
f o r b e s t d a m p e n i n g
R a c e - p r o v e n
D y n a m i c S t r u t
f r o n t s u s p e n s i o n
C a r b o n - f i b e r
C o m p o s i t e C h a s s i s
F a c t o r y T e a m
b l u e a l u m i n u m s c r e w s
a n d b a l l e n d s
F a c t o r y T e a m
b l u e t i t a n i u m
t u r n b u c k l e s
P r o - L i n e / J a c o
w h e e l / t i r e c o m b o
f r o n t a n d r e a r
W
i d e
b a t t e r y
s l o t s
#4016
