switch. Now the current function is accepted and Apollo transmits the remote control IR-signal
associated with it and/or possible other additional functions.
2a) Push the STEPPING switch long (Parameter P5) and Apollo starts to step automatically
through the pages (every Page’s signal light switches on in turn). All the Pages are not
necessarily stepped, controller will skip unused ones. If you keep the switch down it start to
scan automatically the pages.
2b) When the desired Page LED is lit, push the ACCEPTANCE switch and Apollo select the
Page and starts to automatically step the commands within the Page when you push the
STEPPING switch again.
2c) When the symbol representing the desired function is selected, push the ACCEPTANCE
switch. Now the current function is accepted and Apollo transmits the remote control IR-signal
associated with it and/or possible other additional functions.
Row stepping mode 5:
1a) Push the STEPPING switch short (Parameter P5) and Apollo steps automatically to the next
command line on selected page, the LEDs indicates the active line. All the lines are not
necessarily stepped, controller will skip unused ones.
1b) When the desired line is selected, push the ACCEPTANCE switch and Apollo select the
line and pushing the STEPPING switch again Apollo steps automatically the commands on
selected line, the LED indicates the active one. All the commands are not necessarily stepped,
controller will skip unused ones.
1c) When the LED representing the desired command is selected, push the ACCEPTANCE
switch. Now the current function is accepted and Apollo transmits the remote control IR-signal
associated with it and/or possible other additional functions.
2a) Push the STEPPING switch long (Parameter P5) and Apollo starts to automatically scan
through the pages (every Page’s signal light switches on in turn). All the Pages are not
necessarily stepped, controller will skip unused ones.
2b) When the desired Page LED is lit, push the ACCEPTANCE switch and Apollo select the
Page and starts to automatically step the lines on selected page, the LED indicates the active
one. All the lines are not necessarily scanned, controller will skip unused ones.
2c) When the desired line is selected, push the ACCEPTANCE switch and Apollo select the
line and pushing the STEPPING switch again Apollo steps automatically the commands on
selected line, the LED indicates the active one. All the commands are not necessarily stepped,
controller will skip unused ones.
2d) When the symbol representing the desired function is selected, push the ACCEPTANCE
switch. Now the current function is accepted and Apollo transmits the remote control IR-signal
associated with it and/or possible other additional functions.