3.8 Adding adaptivity
Adaptivity can be recorded either by copying the adaptivity code from another device, or by entering
the lock code (
appendix 1
). Adding of adaptivity is carried out as follows:
1) Wake up the device by pushing a button from 0 to 9. The led of the selected page lights up.
2) Enter the programming mode by pressing C + D + E simultaneously; the Prog-led lights up.
3) Enter the adaptivity adding mode by pushing the button 8.
4) Select the page, to which you intend to set adaptivity, by pushing the number of the page
(numeric buttons 0–9). The led of the page lights up to indicate the selection.
5) Select the button, to which you intend to set adaptivity, by pushing the number of the page (0–
E). The led of the button starts blinking to indicate the selection.
6) An adaptivity code 00...15 is programmed by selecting it using the numeric buttons 00..15 or
recording it from another device using the button E. Button D removes the previously entered
adaptivity code.
7) Store the recording by pushing the button A. Pushing the button B cancels the recording. After
the selection the device returns to action 4).
8) By pushing the button C continuously for about 2 seconds you will return to action 2). By
pushing the button C again for 2 seconds the device will return to the standby mode.