October 11, 2011
Page 13 of 22
66 3081 018-4
4 Settings and supervision in VISIONLINE
Before starting any work in VISIONLINE, the online functionality for safes must be enabled
in the software.
Note:
VISIONLINE 1.10.0 or higher is required.
4.1 Enabling online functionality for safes
Online functionality for safes require that the VISIONLINE software options Online and
In-room safes are set; see section 4.1.1.
Once the options have been set in the software, different alternatives for the safes are available at
Tools/Options/Online/Safes
; see section 4.1.2.
4.1.1 Installing an option in VISIONLINE
If the Online and In-room safes options were ordered together with the VISIONLINE software, they are
included in the VISIONLINE license code and will be set in the software when the license code is entered.
If the options should be added to the system at a later occasion, when the license code has already been
entered and system ID is therefore set, an option code is used instead. Several software options can be
included in one option code. An operator with the authority to handle option codes must be logged on.
Normally, options are set by the system manager or the distributor.
When ordering the option, the system code must be communicated to the ordering department:
1.
Double click on
System settings
under the
Reports
tab in the navigation window to find the
system code.
System settings
is available even if you are not logged on.
2.
Communicate your system code to the order department; see order acknowledgement for phone
number and e-mail address. The system code can also be entered in the Ordering web page when
making the order.
To install the option:
1.
When you have got your option code, go to
Tools/Option code
.
2.
Enter the option code and click
Apply
.
