As a minimum, you will also need to enter a
Remote Code
. This
remote access code will be required should you need to
reconfigure the unit in the future. Minimum length is 4
characters. Maximum length is 16. The characters can be letters
or numbers.
If you are enabling IP reporting then contact your monitoring
company (ARC), get an account number and put it into
Account
Code
section here.
Note:
Remember to select the IP reporting option in the
securecomm.hkc.ie
portal.
If the end user wants the option of control via the
HKC APP
they
will need a 4 to 6 digit (i.e. numerals)
User Code
- similar to a
traditional arm/disarm code. The “0" digit may be used.
A
SecureComm Password
, chosen by the installation engineer,
must also be entered. The minimum length of the password is 4
characters. Maximum length is 16. The characters can be letters
or numbers.
when the
HKC APP
is being set up.
Keep this password safe for the moment
, it will
be required
Finally, press the
Connect
icon.
Commissioning the GSM-WiFi U - Standalone contd.
1234567
1234567
100811811
100811811
18867
18867
2222
2222
Wait a few moments while the customer’s details are read from
the
SecureComm
server.
Note:
If the unit cannot connect to the
SecureComm
server, you may
have to briefly press the
Connect/Reset
button again.
Note:
When the unit is successfully commissioned the
GSM Status
LED
will flash green. Each flash represents 20% network coverage (e.g. 4
flashes = 80%).
1234567
100811811
!
!
!
5
Summary of Contents for SecureComm HKC GSM-WIFI U
Page 27: ......
