Lever and Cylinder Removal
Standard Cylinder Installation
Interchangeable or Removable Core Installation
Rotate key 45
ϒ
and
hold
Depress lever retainer
with push pin tool
Control key
*
C
Rotate key 45
ϒ
and
hold
Depress lever retainer
with push pin tool
Control key
*
C
Remove/Reuse
6 Pin Tailpiece
Plastic Core
Construction
Core
7-pin –
in box
6-pin –
in core
Keyed
Cylinder
Keyed
Cylinder
C
New Cylinder
Washers
(only 30-prefix)
Cylinder
Outside
lever
Key
Cylinder
spacer
IMPORTANT:
Before cylinder installation 10G16, 10G30,
10G37, 10G38 and 10G54 functions
lock, must be timed/preset by rotating
cam (within the the lever support tube)
completely counterclockwise.
•
Remove cylinder and tailpiece, using
control key (stamped “C”)
•
Insert Phillips #2 screw driver into
cylinder opening making contact with
lever retainer.
•
Pull lever retainer horizontally towards
door hinge and remove lever.
*Note- 1 Bitted cylinders utilize a control
key cut 113511
4
Correct key orientation
during assembly
• IMPORTANT:
Remove tailpiece from construction
core and insert into new cylinder
• Install Cylinder
Insert cylinder with control key (stamped “C”)
into lever; rotate 15 degrees and remove key
•
Remove construction core
or plastic core
If keyed – use Control Key
(stamped “C”) rotate 15
degrees and pull
Remove/Reuse
6 Pin Tailpiece
Plastic Core
Construction
Core
7-pin –
in box
6-pin –
in core
Keyed
Cylinder
Keyed
Cylinder
C
New Cylinder
Remove/Reuse
6 Pin Tailpiece
Plastic Core
Construction
Core
7-pin –
in box
6-pin –
in core
Keyed
Cylinder
Keyed
Cylinder
C
New Cylinder
Remove/Reuse
6 Pin Tailpiece
Plastic Core
Construction
Core
7-pin –
in box
6-pin –
in core
Keyed
Cylinder
Keyed
Cylinder
C
New Cylinder
Remove/Reuse
6 Pin Tailpiece
Plastic Core
Construction
Core
7-pin –
in box
6-pin –
in core
Keyed
Cylinder
Keyed
Cylinder
C
New Cylinder
C
Remove
Construction
Core
Install
New/Final
Cylinder
© SARGENT Manufacturing Company
A7133J
3
Lever retainer
Standard Cylinder
Interchangeable and Removable Core Cylinder
