80-9360-1043-020 Rev 1 05/21
Copyright © 2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
9
6000 Series Programming Instructions:
Wi-Fi Method
Shown in
ON Position
Follow these steps after operator has been
successfully installed and power has been turned on
(see Page 4, Initial Wiring):
1. Turn on Operator Wi-Fi
With cover off:
Using joystick, scroll to Wi-Fi Link menu on LCD
screen.
Select ON by pushing joystick RIGHT or
LEFT.
Red LED indicates ON. (Figure 15)
With cover on:
Toggle 3 Position switch on end cap 3 times.
(Figure 16)
NOTE:
• Operator will emit a long beep when Wi-Fi
has been successfully turned on.
• Wi-Fi automatically turns off after 20 minutes
of inactivity.
• For further security, Wi-Fi can be turned off
immediately by selecting OFF on LCD screen
or toggling 3 Position switch again. Operator
will emit a short beep when Wi-Fi has been
successfully turned off.
• Operator serial number, password and IP
address are located inside 3 Position switch
door. (Figure 17)
2. From your smart device open Wi-Fi Networks to
search for operator SSID. Once your specific ID
beginning with NDC6000_ is found, connect to
network.
3. Enter operator password.
4. From your web browser
,
enter 192.168.1.1 into
search bar.
5. The 6000 Series Operator homepage is indication
of a successful connection. (Figure 18)
Figure 15
WiFi Link
ON (192.168.1.1)
BEEP
Toggle
OFF/ON
3x
Figure 16
Figure 17
Setup Using Wi-Fi
Figure 18
Serial Number
Password
IP Address
