42
EN
Assembly
At tention!
Material damage caused by working on the door leaf:
Dismantle and remove the lock when working on
the door leaf, for example when drilling or milling.
· Only use the factory-made drill holes for attaching the door fittings
· Dismantle and remove the lock before working on the door leaf, for example when drilling or milling.
Functional impairment caused by faulty milling of the lock recess:
It must be possible to insert the lock
without force and screw it in place without distortion.
· Mill the lock recess according to the lock case dimensions.
Damage caused by dirt:
Contamination damages the lock.
· Clean the lock recess and all drill holes by blowing out or vacuuming before installation.
Impaired function caused by distorted installation:
All bolts must be able to close without transverse
loading.
· Install the lock, all bolts and accessories (strike plate, fittings, lever handle) without distortion.
Material damage caused by forced insertion of the latch pin into the lock follower:
It must be possible
to simply push the latch pin of the door handle into the lock follower.
· Do not use any tools to push the latch pin into the lock follower.
Impaired function caused by door handle not moving freely:
Install the lock so that the latch pin and
the lock follower are aligned.
Danger of destruction by construction key:
Using a construction key can destroy the lock. The lock func-
tion is then no longer guaranteed.
· Use a suitable locking cylinder to operate the lock.
A
Assembly
Summary of Contents for MSL 23421
