Assa Abloy Keso K.536, Instruction Manual

Page: 70 / 156

70
EN
Operation
Carr ying out emergency energisation
1 Connect the supplied USB-OTG cable
· to the programming device with the end marked in red and to the Integra fitting with the opposite
end (Fig. 18, page 69)
· to a laptop or a USB powerbank

The fitting is supplied with power.
2 Replace the batteries.
3 Carry out a function test (see the instructions included with the product).
Integra cylinder
The Integra cylinder is not responding or only gives limited response to authorised keys if the battery
status of the cylinder drops to the following limit values:
Battery status Cylinder behaviour
2 % the cylinder only grants access every 2nd reading
1 % the cylinder only grants access every 4th reading
0 % (empty) the cylinder only opens through emergency opening with the programming device
with a KAPI cable
If the cylinder no longer responds to authorised keys with a low battery status, an emergency opening
must be carried out with the
programming device and a KAPI cable.
Carr ying out an emergency opening
1 Insert an authorised key in the aerial of the programming device .
2 Insert the supplied programming cable KAPI mechatronic cylinder (digital) on the cylinder.
3 Connect the other end of the programming cable KAPI mechatronic cylinder (digital) to the port for the
programming device programming cable (Fig. 19, page 71).
4 Click on the symbol
p p
.
5 Open the door with an authorised key.
6 Replace the batteries.
7 Carry out a function test (see the instructions included with the product).