4. Using the
arrow
keys on the right, scroll to the Zone from which
you want to remove an Actuator.
5. Press the
Actuator
button on the left. The corresponding Actuator
will open. Locate this Actuator and check that it is the one you wish
to remove.
6. If it is, press
Remove From Zone
and confirm your selection
(the Actuator will close automatically when confirmed).
7. If it is not, press the
Actuator
button again to close this Actuator.
MODIFYING SYSTEM CONFIGURATION
Removing Actuators from Zones:
Note: All Rain Sensors must be removed from a Zone before removing
Actuators from that Zone.
1. From the Home page, press
Setup.
2. Press
Zone Setup.
3. Press
Remove from Zone.
This now takes you to a screen where you can remove Actuators
from Zones.
8
Summary of Contents for Interlock Elevation Window Control System
Page 31: ...31 NOTES...
